What are some good architecture firms in Mumbai?

Mumbai has no shortage of architecture firms, but the right one depends entirely on your project type. For pharma and industrial facilities in Navi Mumbai or Thane, you need a firm with GMP compliance experience and a working knowledge of MIDC approvals — that's a very different skill set from a residential firm in Bandra. Geometrix has been handling industrial, residential, commercial, and institutional projects across Mumbai and the MMR since 2004. 650+ projects delivered, all in-house.

How much do architects charge in Mumbai?

In Mumbai, architectural fees typically run between ₹18 to ₹60 per sq ft for design work, depending on project complexity, scope, and the firm's experience. For full-service engagements — design through site supervision — most firms work on a percentage of construction cost, usually 5–12% for residential and 8–15% for commercial or industrial. At Geometrix, we give you a clear fee breakdown before anything begins. No ambiguous line items mid-project.

What approvals are needed to build a commercial building in Mumbai?

All proposals go through MCGM's Building Proposal Department under the DCPR-2034 regulations. You'll need to submit architectural drawings signed by a Council of Architecture registered professional, along with NOCs from the Fire Brigade, structural engineer certification, and compliance with FSI entitlements for your zone. Projects in Navi Mumbai fall under CIDCO and NMMC jurisdiction instead. The approval timeline varies — a clean, complete first submission makes a significant difference. Geometrix handles MCGM and CIDCO submissions regularly.

How do I choose the right architecture firm in Mumbai for my project?

Start with sector experience. A firm that designs pharma plants thinks very differently from one that does luxury residences. Check their portfolio for completed projects — not renders, actual built work — in Mumbai or the MMR. Verify CoA registration. Ask specifically who handles your project (the principal architect or a junior team). And ask how they manage MCGM approvals. The best architecture firms in Mumbai answer all of this without hesitation.

What is the difference between a greenfield and brownfield architecture project?

A greenfield project starts on a fresh, undeveloped site — common for new industrial campuses in Navi Mumbai's MIDC belt or residential plots on the MMR periphery. A brownfield project works within or expands an existing structure — far more typical in dense Mumbai neighbourhoods where redevelopment, floor additions, and change-of-use projects dominate. Both need different approaches to design, costing, and regulatory submissions. Geometrix has handled 400+ greenfield and 250+ brownfield projects across India.

How long do building approvals take in Mumbai?

It depends on the project type and which authority governs your plot. For BMC-limit projects processed through MCGM's AutoDCR system, residential approvals can take a few weeks to several months. Industrial and pharma facilities often need additional NOCs — environmental clearances, fire NOCs, factory act compliance — which add time. Submitting a complete, accurate proposal the first time is the single biggest factor in how fast approvals move. Incomplete submissions get returned and the clock resets.

Do architecture firms in Mumbai handle interior design as well?

Many do, including Geometrix. The key question is whether interior design is handled in-house or subcontracted — because that directly affects coordination and accountability. For commercial spaces in BKC or Worli, and for premium residential projects, having architecture and interiors run by the same team from day one produces a more coherent result. Separate consultants working from finished drawings are always playing catch-up.

Building High-Performance Pharmaceutical Facilities with Engineering Excellence

Managing multiple consultants can slow down projects, increase costs and create coordination costs. Geometrix solves the challenges of facility development by integrating all pharmaceutical engineering services such as structural engineering, 3D modelling, MEP, HVAC, PHE, fire protection and bringing disciplines into one team. Our service is a fully compliant pharmaceutical manufacturing facility.

0+

Years of Experience

0+

Greenfield Projects

0+

Brownfield Projects

Licensed

Consultants

Complete Pharmaceutical Engineering Services Under One Roof

End-to-End Architecture, Industrial Planning & Project Management

Pharmaceutical Facility Planning & Architecture

Designs for efficient pharmaceutical manufacturing of GMP-focused facility layouts, including cleanrooms, production flow, and master planning.

Structural Engineering & Industrial Design

Designs of industrial buildings, utility buildings, equipment foundations, and warehouses that are safe, durable, and compliant.

3D BIM Modeling & Engineering Coordination

BIM models that integrate all engineering disciplines and clash significantly lessen the accuracy of construction.

MEP, HVAC, PHE & Fire Engineering

Pharmaceutical compliant facility operations designed and engineered all MEP systems, HVAC in pharmaceutical industry, PHE, utilities, and fire protection.

Regulatory Engineering & Project Management

Everything from engineering, project coordination, and tender management and support to site supervision and compliance management provided.

Turnkey Pharmaceutical Engineering

One integrated team for all offered pharmaceutical engineering services for the planning, design, and engineering services for construction support and commissioning.

Integrated Pharmaceutical Engineering for Efficient Production Facilities

Managing all aspects of engineering gives us the ability to facilitate pharmaceutical projects from realization to construction with improved precision, efficiency, and assurance.

What We Deliver

Cold chain warehouse design
Material flow corridor planning
GMP dispatch & receiving bays
Quarantine & segregation zones

Key Benefits

Reduced cross-contamination risk
Regulatory-ready storage
Optimised space utilisation
Scalable for future expansion

Engineering Safer Pharmaceutical Manufacturing Facilities by Design

The pharmaceutical engineering process has incorporated safety into each step. Our multidisciplinary team creates compliant facilities that have been designed with architectural, structural, MEP, fire protection, containment and utility systems that enable reliable pharmaceutical production.

Fire Protection Engineering

Designing fire detection and suppression systems, emergency exits, compartmentation, and life safety solutions for compliant pharmaceutical facilities.

Hazardous Area Engineering

Planning hazardous area classification, ventilation, and protection from explosion and engineering control systems for safe pharmaceutical operations.

Cleanroom & Containment Design

Building cleanroom and pressure-controlled and containment solutions for GMP compliance by pharmaceutical architects with experience.

Emergency Planning & Compliance

Creating emergency plans, evacuation and utility service plans, engineering drawings, and providing compliance to regulations services.

Integrated Pharmaceutical Engineering Services Across Every Discipline

Geometrix is a team of pharmaceutical architects, structural engineers, MEP, hvac, bim, phe designers and fire engineers who can provide fully coordinated pharmaceutical engineering services.

Pharmaceutical Engineering Scope – End to End

Architectural Design	GMP compliant facility planning, production layouts, cleaning room zoning, workflow optimisation, warehouse planning and expanding for future needs to enhance operational efficiency and regulatory compliance.
Structural Engineering	Structural design of RCC and steel industrial structures, equipment foundations, mezzanine floors, utility buildings, load analysis, design for long term lasting performance and safety.
3D BIM Modeling	Produced coordinated 3D BIM models to assist in clash checking, design validation, quantity take-off and smooth construction coordination, including integrating architecture, structural, MEP, HVAC, PHE and fire systems.
MEP Engineering	Full range of mechanical, electrical and plumbing requirements ranging from power distribution and lighting systems, utility networks, drainage systems and process utility integration for pharmaceutical facilities.
HVAC Engineering	Cleanroom air distribution, pressure cascades, HEPA filtration, temperature and humidity control, contamination management in GMP environments and other specialized HVAC in pharmaceutical industry solutions.
PHE Engineering	Planning, design, construction of water supply, sanitary drainage, stormwater system, process water distribution, utility piping and plumbing systems for efficient pharmaceutical operations.
Fire Protection Engineering	Fire protection systems that cover all aspects of fire detection, hydrant systems, sprinkler systems, fire safety, emergency exits, containment planning and life safety compliance.
Project Engineering & Coordination	Multidisciplinary Design Review, BOQs, Tender Support, Engineering Documentation, Site Coordination, Vendor Coordination, Commissioning Assistance, Project Coordination End to End (e2e) for successful project Delivery.

Looking for a Single Partner for Complete Pharmaceutical Engineering

Why Choose Geometrix for Pharmaceutical Engineering

6 Reasons Pharma Companies Trust Geometrix Architects

Turnkey Pharma Engineering

All-in-one from concept to commissioning.

GMP & Regulatory Expertise

WHO-GMP, USFDA, MHRA, EU — audit-ready facilities.

Supply Chain Consulting

Supply chain efficiency built into architecture.

Safety-First Design

Containment, egress, fire & hazardous zone planning.

Specialised HVAC

Full cleanroom design & qualification documentation.

Proven Track Record

400+ greenfield projects, CIPs, Lupin & more.

FAQs

Frequently Asked Questions

Real questions from property owners, developers, and business owners

Pharmaceutical architects are responsible for creating buildings that meet the requirements of the GMP and will provide for efficient pharmaceutical manufacture, cleanroom operations, process flow, material transportation, regulatory compliance and future growth. They collaborate closely with structural, MEP, HVAC, PHE, and fire engineering teams to provide integrated solutions for the facilities.

The complete pharmaceutical manufacturing facility design involves from concept to commissioning architectural planning, structural engineering, 3D BIM modeling, MEP services, HVAC in pharmaceutical industry applications, PHE systems, fire protection, utility planning, cleanroom design and engineering coordination.

Geometrix offers a complete pharmaceutical engineering service, ensuring the planning, architectural design, structural engineering, BIM construction, MEP and HVAC, PHE and Fire Engineering, regulatory coordination, project management and execution support for pharmaceutical manufacturing facilities.

Good pharmaceutical engineering means all areas of the facility, from production and cleanroom areas to utilities and safety systems are compliant with GMP. It will increase operational efficiency, promote product quality, reduce compliance risks and provide long-term manufacturing performance.

Tell Us About Your Project

Pharmaceutical Engineering Services for Future-Ready Manufacturing Facilities

Building High-Performance Pharmaceutical Facilities with Engineering Excellence

0+

0+

0+

Licensed

Complete Pharmaceutical Engineering Services Under One Roof

Pharmaceutical Facility Planning & Architecture

Structural Engineering & Industrial Design

3D BIM Modeling & Engineering Coordination

MEP, HVAC, PHE & Fire Engineering

Regulatory Engineering & Project Management

Turnkey Pharmaceutical Engineering

Integrated Pharmaceutical Engineering for Efficient Production Facilities

What We Deliver

Key Benefits

Engineering Safer Pharmaceutical Manufacturing Facilities by Design

Fire Protection Engineering

Hazardous Area Engineering

Cleanroom & Containment Design

Emergency Planning & Compliance

Integrated Pharmaceutical Engineering Services Across Every Discipline

Pharmaceutical Engineering Scope – End to End

Looking for a Single Partner for Complete Pharmaceutical Engineering

Why Choose Geometrix for Pharmaceutical Engineering

6 Reasons Pharma Companies Trust Geometrix Architects

Turnkey Pharma Engineering

GMP & Regulatory Expertise

Supply Chain Consulting

Safety-First Design

Specialised HVAC

Proven Track Record

Pharmaceutical Architecture

MANKIND PHARMA LTD.

ARYAVAAN PHARMACEUTICALS PVT. LTD., VERNA, GOA

BIOPHARMA, YEMAN

CIAN PHARMACEUTICALS PVT. LTD., ROORKEE, HARIDWAR 1

CIRON PHARMACEUTICALS & DRUGS PVT. LTD., TARAPUR MIDC 1

KRISHAT PHARMA, NIGERIA

NITIKA PHARMA, NAGPUR

PSA PHARMACEUTICALS, PITHAMPUR

S G PHARMA, PATALGANGA

XENON PHARMA PVT LTD

Connect With Us

Frequently Asked Questions

Q1.What are the duties of the architects in a pharma manufacturing project?

Q2.What do pharmaceutical manufacturing facility design involve?

Q3.What are some of the pharmaceutical engineering services offered by Geometrix?

Q4. What do you think the significance of pharmaceutical engineering is to the GMP-compliant facility?

Start Your Pharmaceutical Engineering Project Today